Description
A pair of full-lengthJeep-specificPro-Ride coil springs are supplied to provide the correct lift height and smoothpredictable ride across various terrains. Manufactured from high tensile steelour direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Specifications:
| _ASC | Measure the rear u-bolts before ordering. Some XJ’s are equipped with a Dana 44 rear axle. |
| _ASC | CV style rear driveshaft (not included) and slip yoke eliminator kit is required. |
| _ASC | System only works with 4.0L motor and automatic transmission. |
| _ASC | ’96 and earlier models may require a longer emergency brake cable. |
| _DES | XJ 4.5in Long Armwith Dana |
| _EXT | XJ 4.5in Long Arm with Dana |
| _FAB | Redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel |
| _FAB | ProRide coil springs offer improved ride quality and more articulation |
| _FAB | Massive belly pan that incorporates the link mounts and is built to smash rocks |
| _FAB | Glideride leaf springs to provide full lift height and increased capacity |
| _FAB | Sway bar quicker disconnects and extended rear link for improved offroad flex |
| _FAB | Front HD track bar to correctly position the front axle and control lateral movement |
| _FAB | Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping |
| _FAB | Easy100% Bolt-on installation |
| _FAB | Allows clearance for 32″ tires |
| _MKT | Maximize the capability of your 1984-2001 Jeep Cherokee XJ with this 4.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 32″ tires. By maximizing the length of both the upper and lower control armsBDS has minimized caster change for optimal handling and minimized road forces. The control arm geometry is setup with a massive belly pan that incorporates the link mounts and is built to smash rocks. Believe it or notthis system is completely bolt-on with no welding to the unibody required! |
| _MKT | Up front the lift kit includes a belly pan with new pivot mountsheavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics4.5″ Pro-Ride coil springs capable of full coil bind and bump stop extensions to control the compression travelbut increase wheel travel. Also included are braided stainless steel brake linesultimate sway bar disconnectsand front adjustable track bar with flex joint fits into the existing frame mount to improve the steering and handling geometry. |
| _MKT | The rear kit utilizes Glide-Ride leaf springs for maximum travel and stainless braided brake line to allow the springs to flex. Finish off the kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. |
| _MKT | Long Arm Conversion |
| _MKT | Upgrading the standard control arms to a long arm adds strengthimproves handling and takes offroad articulation to the next level. This upgrade consists of massive 1/4″ steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation. |
| _MKT | Pro-Ride Coil Springs |
| _MKT | A pair of full-lengthJeep-specificPro-Ride coil springs are supplied to provide the correct lift height and smoothpredictable ride across various terrains. Manufactured from high tensile steelour direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind. |
| _SHO | Suspension lift kit |
| _DEF | Suspension Lift Kit |
Reviews
There are no reviews yet.