Description
2021-2023 Ford F150 4wd 6in. Suspension Lift Kit| 4in. rear block – Fox 2.0 Performance Series Snap Ring front shocks| Fox 2.0 Performance Series rear shocks
Specifications:
| _MKT | These FOX 2.0 Performance Series coil-over struts bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut assemblies while retaining the OE coil spring and top plate. They feature a 2.0″ extruded and machined 6061 T6 aluminum body for better heat dispersionalong with an internal floating piston (IFP) to eliminate oil aerationFOX’s proprietary internals5/8″ hard chrome plated heat-treated alloy shaft. |
| _MKT | High Clearance Crossmemebers |
| _MKT | BDS maximizes ground clearance with their heavy duty 1/4-inch thick laser cut perfect fit crossmembers. Paired with a front skid plate system that bolts together to create a rigid subframe while adding extra protection. |
| _MKT | Heavy Duty Steering Knuckles |
| _MKT | BDS corrects steering geometry at the new taller ride height using a pair of high-strengthCNC machined ductile cast iron steering knuckle design to work with replacement tie rod ends to maintain steering angles for proper function and ESC compatibility. |
| _SHO | Suspension lift kit |
| _DEF | Suspension Lift Kit |
| _ASC | 18″ or larger diameter wheels are required. Stock 17″ and 18″ wheels cannot be re-installed. Stock 20″ wheels can be used with up to a 305/60R20 tire. |
| _ASC | Will not work with models with CCD (Continuous Controlled Damping) |
| _ASC | 18″ wheels with 5-5.5″ backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5″ backspacing is highly recommended for tire-to-frame crash bar clearance. |
| _ASC | Models with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w/ kit) |
| _ASC | Block kits replace factory 1-1/4″ block. The stock block will not be reinstalled. |
| _ASC | Crash bars may require modification based on wheel and tire choice. It is the end user’s responsibility to ensure modifications are non-detrimental to vehicle safety. |
| _ASC | Does NOT fit diesel models. |
| _ASC | Will not work with Tremor models. |
| _ASC | Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedureBDS recommends having this performed prior to installing the lift. |
| _ASC | This system has not been tested on models equipped with Ford BlueCruise. |
| _DES | 2021-2023 Ford F150 4wd 6in. Suspension Lift Kit| |
| _EXT | 2021-2023 Ford F150 4wd 6in. Suspension Lift Kit| 4in. rear block – Fox 2.0 Performance Series Snap Ring front shocks| Fox 2.0 Performance Series rear shocks |
| _FAB | FOX 2.0 Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tunedprecision valving |
| _FAB | High clearance crossmembers improve strength and offroad capability |
| _FAB | Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility |
| _FAB | Top mounted strut spacers to provide lift and install easily |
| _FAB | Differential skid plate for improved offroad protection |
| _FAB | Rear lift blocks and u-bolts to lift and level the stance |
| _MKT | Increase the performance and capability of the 2021 Ford F150 trucks with 6-inch lift kit with FOX 2.0 struts by BDS Suspension. Designed to improve stance the BDS 6 inch lift kit with FOX 2.0 front struts give more capability off-road. This kit includes everything necessary to set your F150 truck up right with clearance for up to 37″ tires. |
| _MKT | This kit takes advantage of BDS’s tried and true high-clearance design for improved ground clearancestrengthand offroad protection while correcting suspension and steering geometry for great on-road handling characteristics. Up front the kit utilizes FOX 2.0 strut shockshigh-arched 1/4-inch thick steel crossmembersmultipiece differential relocation brackets and skidplate designed for offroad protection. Steering geometry is corrected at the new taller ride height with a pair of massive CNC-machined ductile iron steering knuckles. These combined with the provided sway bar relocation bracketsbrake line bracketsalignment cam boltssupplied hardware and more provide a comprehensive front suspension lift ready for use and abuse. |
| _MKT | In the rear BDS utilizes high strength fabricated lift blocks and longer u-bolts to lift and level the stance along and NX2 Nitro or optional FOX 2.0 Performance Series shocks. |
| _MKT | FOX 2.0 Struts |
Reviews
There are no reviews yet.