Description
08-10 F250-F350 Gas 4-4 4-Link spring Kit
Specifications:
| _ASC | These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering. |
| _ASC | If your vehicle is equipped with a carrier bearingyou will need to order 123402 in the accessories section. |
| _ASC | Removal of factory block required. |
| _ASC | Front exhaust modification may be required to clear the front driveshaft on gas models. |
| _ASC | U-bolts will not fit dually models. |
| _ASC | Dropped pitman arm will not fit 10 lug widetrack F350 models. |
| _DES | 08-10 F250-F350 Gas 4/4 4-Link spring Kit |
| _EXT | 08-10 F250-F350 Gas 4-4 4-Link spring Kit |
| _FAB | Easy100% Bolt-on installation |
| _FAB | Pro-Ride dual rate coil springs provide a remarkable ride through any terrain |
| _FAB | Heavy duty 4-Link control arms offer improved handlingstabilitystrength and caster control during wheel travel |
| _FAB | Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling |
| _FAB | Fabricated steel blocks provide level stance from front to rear |
| _FAB | Standard NX2 Nitro shocks with vehicle-specific valving for better control |
| _FAB | Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road |
| _MKT | Raise the height of your 2008-2010 Ford F250 and F350 Super Duty gas truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stanceperformanceand capabilitythis kit includes everything necessary to set your truck up right with clearance for up to 35″ tires. |
| _MKT | To optimize steering geometry once lifteda forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle. |
| _MKT | Up front the lift kit includes gas-specific Pro-Ride coil springs4-link control arms with conversion bracketsforged drop pitman arm and track bar bracket for steering correctionsway bar relocationbrake line brackets and precision tuned nitrogen charged shocks. |
| _MKT | In the rear the base kit utilizes a high-strength lift blocklonger u-bolts and a matching set of NX2 Nitro or FOX Performance shocks. |
| _MKT | 4-Link Conversion |
| _MKT | Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel. |
| _MKT | Pro-Ride Coil Springs |
| _MKT | A pair of full-lengthgas-specificPro-Ride coil springs are supplied to provide the correct lift height and smoothpredictable ride across various terrains. |
| _MKT | Steering Correction |
| _SHO | Suspension lift kit |
| _DEF | Suspension Lift Kit |
Reviews
There are no reviews yet.