Description
2020-2022 Ford F250-F350 6in. Radius Arm Suspension System – rear block – Fox 2.5 coilover
Specifications:
| _ASC | Ford recommends the replacement of the pitman arm nut after each time it has been removed. |
| _ASC | Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedureBDS recommends having this performed prior to installing the lift. |
| _ASC | Due to factory ride heights being lower on 2020 and newer model year trucksthe net lift you will gain with this kit will be 1″ more than advertised. (EX. 4″ kit will net 5″ of lift) |
| _ASC | Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. |
| _ASC | If your truck is equipped with a factory rear sway bar add: BDS123808 |
| _ASC | If your truck is equipped with a 2-piece rear driveshafta Carrier Bearing Drop Kit may be required: BDS123402. |
| _ASC | Due to the taller factory ride heightTremor models will not net the full advertised lift height. The final ride height will be the same as standard models. |
| _ASC | Larger tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section. |
| _ASC | The indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck’s equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission. |
| _ASC | Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required. |
| _ASC | Installation requires a torque wrench capable of 405 ft-lbs. |
| _DES | 2020-2022 Ford F250-F350 6in. Radius Arm Suspension System |
| _EXT | 2020-2022 Ford F250-F350 6in. Radius Arm Suspension System – rear block – Fox 2.5 coilover |
| _FAB | FOX 2.5 Coil-Over mounts in factory coil bucket location |
| _FAB | Adds additional secondary FOX 2.0 shock for max performance |
| _FAB | Eibach coil springs ride smooth through the roughest terrain |
| _FAB | Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance |
| _FAB | Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling |
| _FAB | Fabricated steel blocks provide level stance from front to rear |
| _FAB | FOX shocks are fully serviceable and resistant to corrosion and harsh environments |
| _MKT | Built to Outperformtake your Ford Super Duty diesel truck to the next level with this 7-inch radius arm lift kit with FOX 2.5 Coil-over shocks from BDS. Designed to improve stanceperformanceand capabilitythis kit includes everything necessary to set your truck up right with clearance for up to 38″ tires. |
| _MKT | At this heightdriveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionallya high clearance transmission crossmember supplied to allow sufficient clearance. |
| _MKT | Up front the lift kit includes FOX 2.5 coil-over shocksheavy-duty replacement radius armsforged drop pitman arm and track bar bracket for steering correctionsway bar relocationand brake line brackets. |
| _MKT | At this heightthe transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift blocklonger u-boltsbrake line brackets and a matching set of FOX Performance shocks. |
| _MKT | FOX 2.5 Coil-Over Conversion |
| _MKT | FOX 2.5 coil-overs offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the boxthese bolt-on 2.5-inch diameter coil-overs are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. |
| _MKT | HD Radius Arms |
| _MKT | In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smoothquietservice-free operation. |
| _MKT | T-Case Indexing |
| _SHO | Suspension lift kit |
| _DEF | Suspension Lift Kit |
Reviews
There are no reviews yet.